Luke Pollard – 2023 Speech on the Firearms Bill
The speech made by Luke Pollard, the Labour MP for Plymouth Sutton and Devonport, in the House of Commons on 24 March 2023.
I thank the hon. Member for Crewe and Nantwich (Dr Mullan) for moving the Bill’s Third Reading today, and the hon. Member for Clwyd South (Simon Baynes) for taking it through Committee.
I rise to speak in support of the Bill, which will make small but important changes to our gun laws. As the MP for the constituency that suffered the tragedy of losing five people in the mass shooting in Keyham of August 2021, I am very mindful that in approaching gun legislation we should all do our best to prevent future tragedies, close loopholes and ensure that the pain and suffering that my community has felt is not felt by others. The Bill will make small but important changes in that direction.
In Committee, Opposition Members made the case that although closing these two loopholes is welcome, it shows that yet again we are making ad hoc changes to gun legislation. There may be a stronger case for a broader review of gun laws, in particular to look at updating the Firearms Act 1968 to ensure that our gun legislation takes 21st-century conditions into account and keeps people safe based on modern rather than historic practices and uses.
The Bill is narrow and I will constrain my remarks to its provisions. It will clamp down on existing loopholes related to miniature rifles. As the hon. Member for Crewe and Nantwich said, the word “miniature” might misleadingly suggest that they are somehow toys or that they are less serious, but .22 rifles are still weapons and should be controlled with appropriate scrutiny of those who apply for a certificate, as well as those without a certificate, as the Bill seeks to address.
Clause 1 will make limited changes to the 1968 Act by introducing a requirement for operators of miniature rifle ranges to obtain a firearm certificate and by restricting such ranges to .22 weapons only—a welcome change that the Opposition think is a good idea. Clause 2 will introduce a new offence of possessing component parts of ammunition with intent to manufacture. The Bill follows the publication of the firearms safety consultation, which sought views on improving the controls on miniature rifle ranges. 73% of those who responded to the survey agreed or strongly agreed
“that the operator of a miniature rifle range should be required to hold a firearms certificate”.
Labour broadly supports the Bill, but we stress that the legislation should go further. In Committee, my hon. Friend the Member for Halifax (Holly Lynch) spoke of her conversations with police officers, who told her that miniature rifles have been adapted into more dangerous weapons and used to facilitate criminality. It was felt that the requirement for someone operating a miniature rifle range to apply for a firearms certificate should be accompanied by further conditions in recognition of the fact that they are running such an establishment rather than simply possessing a firearm. It was also felt that the running of the range should be subject to routine checks on compliance, but that is missing from clauses 1 and 2.
We need our gun laws to be fit for the 21st century. That means recognising that the 1968 Act is out of date and that the body of assembled gun law changes since the Act could be consolidated to ensure that they are fit for modern challenges. An example relevant to clause 2 is the 3D printing of ammunition and firearms, which was briefly mentioned in Committee. At the moment, 3D printing is used mainly for handguns. Designs can be downloaded freely from the internet, so someone with a 3D printer can print a handgun and other kinds of weaponry. That fundamentally changes criminals’ ability to get their hands on firearms and evade the licensing system. It is also possible for them to print elements of ammunition that fit the gun. The casing is explicitly identified as a component part of ammunition in proposed new section 3A(2)(b) of the 1968 Act, which is set out in clause 2.
It does not appear to me that clause 2 explicitly covers 3D printing. When pressed on this in Committee, the Under-Secretary of State for the Home Department, the hon. Member for Derbyshire Dales (Miss Dines), was not able to provide an answer. I realise the Minister of State, Ministry of Justice, the right hon. Member for Charnwood (Edward Argar), who is at the Dispatch Box today, is not responsible for the day-to-day handling of the Bill, but I would be grateful if he could pass my concerns to his officials. If we face a growth in the 3D printing of weapons, which is a genuine risk both in the future and now, we must make sure that the provision of a 3D printer could fall under the same type of offence as suggested in clause 2.
Last week I met Emma Ambler, who lost her twin sister Kelly Fitzgibbons, and Kelly’s two children, to a gun incident. I often speak about Keyham in this place, but it is important to recognise that, around the country, we are seeing people lose loved ones in a variety of circumstances due to firearms, but also due to failures in how firearms certificates and firearms licensing are delivered.
I share the concern of the hon. Member for Old Bexley and Sidcup (Mr French) to ensure that responsible gun owners are able to possess a weapon. Making sure that only appropriate individuals have access to a weapon must be at the heart of our approach to gun laws. Sadly, we have seen police forces, including Devon and Cornwall police in my area, fail catastrophically to ensure that only those who should have a gun certificate have one. It is welcome that the Bill extends the provisions to .22 rifles, but wherever a police force is investigating an individual’s suitability, we must make sure that not only are the proper procedures followed but that the same procedures are followed across the nation.
After the Plymouth inquest, the coroner made a number of remarks in this direction. One recommendation was for the introduction of national training for all police officers involved with firearms licensing, to ensure that the regulation of firearms is the same in every part of the country. That is important when looking to extend the provision of firearms licensing, as we are with this Bill, to make sure that, whether it is Devon and Cornwall police, the Metropolitan police or any other police force in England and Wales, the provisions are the same so that we avoid the loss of life we saw in Plymouth and in relation to Kelly Fitzgibbons and her family.
We accept that, due to the nature of this Bill, the Government are not minded to make broader changes at this time, but we are encouraged that there is an appetite to close the loopholes, as identified with .22 rifles in this private Member’s Bill. I encourage the Government to go further. I look forward to meeting the Policing Minister next week with the families of those we sadly lost in the Keyham tragedy in 2021, to make the case for closing further loopholes on a comprehensive basis to ensure that our gun laws in the 21st century keep all our communities safe.
Labour will back this Bill today, and we hope it further reinforces the need to go further to ensure that all our communities remain safe from gun violence.
